Skip to the content
Physics Navigator

The four exams

Exam patterns for JEE Main, JEE Advanced, NEET and BITSAT

JEE Main has 75 questions in 3 hours at +4/−1, NEET has 180 in 3 hours at +4/−1, BITSAT has 130 in 3 hours at +3/−1, and JEE Advanced changes its pattern each year. Here is each paper in detail and what it means for physics.

Side by side

The four exams compared

The four exams side by side
ExamConducted byModePhysics questionsMarking
JEE Main (Paper 1)NTAComputer-based25 of 75+4, −1
JEE AdvancedAn IIT, for the Joint Admission BoardComputer-based, two papersVaries by yearVaries; partial marking
NEET (UG)NTAPen and paper (OMR)45 of 180+4, −1
BITSATBITS PilaniComputer-based30 of 130+3, −1

The exams differ less in the physics they ask than in how they ask it. JEE Advanced rewards depth and careful reading of multi-step problems; JEE Main rewards breadth and steady accuracy; NEET and BITSAT reward speed with standard results. The same chapter practice serves all four, and the mock papers are where each exam's own timing and marking are learnt.

NTA · computer-based · January and April

JEE Main exam pattern

The entrance examination for the NITs, IIITs and other centrally funded technical institutes, and the qualifying step for JEE Advanced. Paper 1 has 25 questions each in Physics, Chemistry and Mathematics, all compulsory.

questions
75
duration
3 hours
marking
+4 / −1
in physics
25

JEE Main is conducted by the National Testing Agency (NTA) as a computer-based test, usually in two sessions, in January and in April.

Paper 1 (B.E./B.Tech.) has 75 questions in three subjects. Each subject has 25 questions: 20 multiple-choice questions with one correct option, and 5 questions whose answer is a number you type in. From 2025 all 75 are compulsory; the earlier choice of answering any 5 of 10 numerical questions was removed.

JEE Main Paper 1 at a glance
SubjectMultiple choiceNumerical valueMarks
Physics205100
Chemistry205100
Mathematics205100
Total6015300
  • Marking: +4 for a correct answer, −1 for a wrong one, 0 for a question left unanswered. The negative mark applies to the numerical questions too.
  • Time: 3 hours for the whole paper. There is no separate time limit for each subject.
  • What it means for physics: split evenly, that is 2 minutes 24 seconds a question. Physics numericals often take longer than that, so decide in practice which subject you open first.

An IIT, for the Joint Admission Board · computer-based

JEE Advanced exam pattern

The entrance examination for the IITs, open to the top performers of JEE Main. Its pattern changes from year to year, and its one-or-more-correct questions use partial marking.

both compulsory
2 papers
each paper
3 hours
pattern by year
Changes
marking
Partial

JEE Advanced is conducted each year by one of the IITs on behalf of the Joint Admission Board, as a computer-based test with two compulsory papers of 3 hours each. Only candidates who place among the top performers in JEE Main Paper 1 may register; in recent years that has been about 2.5 lakh candidates across all categories.

Unlike JEE Main, the pattern is not fixed. The number of questions, the kinds of question and the marks for each change from year to year and are printed in the paper's own instructions. Recent papers have used these kinds of question in every subject:

  • Single correct: four options, exactly one right.
  • One or more correct: four options, any number of them right, with partial marking.
  • Numerical value: the answer is a number, sometimes to two decimal places.
  • Matching and paragraph questions: match two lists, or answer several questions on one passage.
Partial marking for one-or-more-correct questions (recent JEE Advanced papers)
What you choseMarks
Exactly the correct options, all of them+4
Three options, all correct, when four are correct+3
Two options, both correct, when three or more are correct+2
One option, correct, when two or more are correct+1
Nothing0
Any wrong option among the ones chosenNegative (−2 in recent papers)

On this site the marking is set separately for each section of each test, including the partial-marking ladder. When the exam changes its scheme, the teachers change the numbers and every new paper is marked the new way.

NTA · pen and paper (OMR) · one sitting

NEET (UG) exam pattern

The single entrance test for MBBS, BDS and other undergraduate medical courses in India. It gives about a minute a question, the tightest timing of the four exams.

questions
180
duration
3 hours
marking
+4 / −1
in physics
45

NEET (UG) is conducted by the NTA as a pen-and-paper test answered on an OMR sheet, in one sitting. From 2025 the paper has 180 questions in 3 hours (180 minutes), all compulsory. The optional Section B used until 2024 was dropped.

NEET (UG) at a glance
SubjectQuestionsMarks
Physics45180
Chemistry45180
Biology (Botany and Zoology)90360
Total180720
  • Marking: +4 for a correct answer, −1 for a wrong one, 0 for a question left unanswered.
  • What it means for physics: about one minute a question if time is split evenly. Speed with standard results matters as much as depth.
  • NEET is written on paper, but practising on a screen still trains what decides the score: reading quickly, choosing which questions to leave, and keeping to time.

BITS Pilani · computer-based · two sessions

BITSAT exam pattern

The online admission test of BITS Pilani for its Pilani, Goa and Hyderabad campuses, with English and Logical Reasoning alongside the sciences.

questions
130
duration
3 hours
marking
+3 / −1
in physics
30

BITSAT is a computer-based test of 130 questions in 3 hours, usually offered in two sessions, with no time limit for each part.

BITSAT at a glance
PartQuestions
Physics30
Chemistry30
English Proficiency10
Logical Reasoning20
Mathematics (Biology for B.Pharm.)40
Total130 (390 marks)
  • Marking: +3 for a correct answer, −1 for a wrong one.
  • Extra questions: a candidate who answers all 130 before time runs out may take up to 12 more, but can no longer go back to change the earlier answers.
  • What it means for physics: about 80 seconds a question on average. With Mathematics carrying 40 questions, physics time has to be guarded.

Pace

How much time you get per question

JEE Main gives about 2 minutes 24 seconds a question, BITSAT about 1 minute 23 seconds and NEET about 1 minute, if the paper is split evenly.

Average time per question if the paper is split evenly
ExamQuestionsTimePer question
JEE Main Paper 175180 minutes2 min 24 s
NEET (UG)180180 minutes1 min
BITSAT130180 minutesabout 1 min 23 s
JEE Advanced (each paper)varies by year180 minutesvaries

Exam patterns are set by the exam bodies and can change between years. The figures here are the ones used in the most recent exams; always confirm them in the official information bulletin before your exam.

Work it out

What would your score be?

Type how many you got right and wrong, and the calculator applies the exam's own marking.

Marks calculator

Type how many you got right and wrong; the rest count as left. Uses each exam's own marking.

Your score148
Out of300
Left23

Score = right × marks for a right answer − wrong × marks for a wrong one. For JEE Main and NEET that is 4 × right − wrong; for BITSAT, 3 × right − wrong.

JEE Advanced is left out: its marking changes from year to year and is printed in each paper's own instructions.

Try a question

One physics question in the JEE Main style. Pick an answer and check it.

A ball is thrown straight up at 20 m/s. Taking g = 10 m/s², what is the greatest height it reaches?

Options

See the solution

Answer: (B) 20 m. At the top the ball stops for an instant, so v = 0. From v² = u² − 2gh: 0 = 20² − 2 × 10 × h, so h = 400 ÷ 20 = 20 m. A quick check: the height should grow with the square of the speed, and only h = u²/2g does.

Questions

Questions about the exams

Which exams can I prepare for here?

JEE Main, JEE Advanced, NEET (UG) and BITSAT. Each test uses that exam's question types and marking scheme, including negative marking and the JEE Advanced partial marking. The questions on this site are physics questions.

What is a numerical value question?

A question with no options: you work out the answer and type the number. JEE Main has five in each subject, and JEE Advanced and this portal use them too. Read the instructions on whether a whole number or decimals are expected; in the exam, an answer in the wrong form can be marked wrong.

What is a passage-based question?

Several questions that share one paragraph, figure or set of data. Read the passage once with care and answer all of its questions while it is fresh, rather than coming back to it later and reading it again.

Is it worth guessing when there is negative marking?

Only with some knowledge. At +4 and −1 a blind guess among four options gains a quarter of a mark on average, and more if you can rule options out, but it costs time. At +3 and −1 (BITSAT) a blind guess gains nothing on average. Attempt when you can rule out at least two options.

How many mock tests should I take before JEE Main?

There is no fixed number. A steady rhythm works best: one full mock every two weeks while the syllabus is being taught, one a week once it is complete, and two or three a week in the final six to eight weeks, each followed by a proper analysis.

Is NEET an online or an offline exam?

NEET (UG) is a pen-and-paper exam answered on an OMR sheet. Practising on screen still trains speed, choosing which questions to leave, and keeping to time. JEE Main, JEE Advanced and BITSAT are computer-based.

How long is the JEE Main paper and how many questions does it have?

3 hours and 75 questions: 25 each in Physics, Chemistry and Mathematics, of which 20 are multiple choice and 5 need a numerical answer. All are compulsory, for 300 marks.

Practise in the pattern of your exam

Pick your exam and a chapter, or sit a full mock paper with its own timing and marking.

Start free