Skip to the content
Physics Navigator

Study guide

How to prepare for physics with practice tests

Practise a chapter as soon as it is taught, sit full mock papers regularly, and spend as long analysing each mock as you spent sitting it. Ten steps, each with what to do and why.

  1. 1. Start with chapters, then move to full papers
  2. 2. How often to sit a full mock
  3. 3. How to analyse a mock in thirty minutes
  4. 4. Negative marking: when to attempt and when to leave
  5. 5. Time per question, exam by exam
  6. 6. Physics skills that pay off in every chapter
  7. 7. Common ways to lose marks in a physics test
  8. 8. The last thirty days
  9. 9. Preparing for JEE and NEET in the same year
  10. 10. If you are preparing for a second year

1. Start with chapters, then move to full papers

A full mock tests everything at once, so it says little about any one chapter. Early in the year, practise each chapter as you finish it in class: one practice set within a day or two of the lesson, and another a week later. The first shows whether you understood it; the second shows whether you kept it.

Aim for accuracy before speed. If more than a third of a chapter set is wrong, go back to the notes and the solved examples before taking another set. Practising a chapter you do not yet understand mostly practises guessing.

Once most chapters of a year's syllabus have been covered, bring in full mock papers. They train what chapter practice cannot: switching between topics, choosing which questions to leave, and keeping your head for three hours.

2. How often to sit a full mock

There is no single right number, but a steady rhythm works better than a burst at the end. A pattern many students follow:

  • While the syllabus is still being taught: one full mock every two weeks, with chapter practice in between.
  • Once the syllabus is complete: one full mock a week.
  • In the last six to eight weeks: two or three a week, at the same time of day as your exam slot.

A mock that is not analysed is mostly wasted. If you cannot find the time to go through a paper properly, sit fewer mocks and analyse each one well.

3. How to analyse a mock in thirty minutes

Go through every question you got wrong, and every one you got right by guessing, and put each into one of four groups:

  1. Did not know the idea: the concept is missing. Go back to the chapter, then practise it again.
  2. Knew the idea but made a slip: a sign, a unit, a calculation, or misreading the question. Write the slip down; the same few slips tend to repeat.
  3. Ran out of time: you could have solved it with more time. Look at where the time went; the time-per-question figures on the result page show it.
  4. Should have left it: a long or uncertain question that cost you a negative mark. Practise recognising these early.

Count the groups. If most of your lost marks are slips, slow down and check units and signs. If most are missing ideas, more chapter practice will help more than more mocks. If most are time, practise sets against a strict clock.

Tagging how sure you were as you answer (sure, 50-50 or a guess), on tests where that option is switched on, makes this much quicker: a correct guess is a question you still need to learn, and a wrong "sure" is a misunderstanding worth finding.

4. Negative marking: when to attempt and when to leave

With +4 for a right answer and −1 for a wrong one, a blind guess between four options gains on average a quarter of a mark: a one-in-four chance of +4 against a three-in-four chance of −1. If you can rule out even one option, the odds improve further.

That arithmetic is not a reason to guess everything. A guess costs time that a question you can solve deserves, and a run of wrong guesses hurts confidence in the rest of the paper. A sensible rule: attempt a question when you can rule out at least two options, or when you have a definite method; leave it when you would be guessing blind with time still needed elsewhere.

The sums differ by exam. In BITSAT, at +3 and −1, a blind guess between four options is worth nothing on average, so only an informed guess helps. In the one-or-more-correct questions of JEE Advanced, choosing a single option you are sure of usually earns a safe +1, while adding an option you are unsure of risks the whole question.

5. Time per question, exam by exam

Average time per question if the paper is split evenly
ExamQuestionsTimePer question
JEE Main Paper 175180 minutes2 min 24 s
NEET (UG)180180 minutes1 min
BITSAT130180 minutesabout 1 min 23 s
JEE Advanced (each paper)varies by year180 minutesvaries

Averages hide the real pattern: some questions take thirty seconds and some take five minutes. Use two rounds. In the first, answer everything you can do quickly and mark the rest for review. In the second, return to the marked ones in order of how close you came. The palette's marked-for-review colour exists for exactly this.

6. Physics skills that pay off in every chapter

  • Check units and dimensions. A quick dimensional check rules out wrong options in seconds, in almost every chapter.
  • Read graphs before formulas. Many questions on motion, waves, thermodynamics and circuits are really questions about a slope or an area.
  • Draw the free-body diagram. Most mistakes in mechanics are a missing or misdirected force, not wrong algebra.
  • Use limiting cases. Ask what the answer should be when a mass goes to zero, an angle to 90 degrees, or a resistance to infinity, and discard options that fail.
  • Approximate where the options allow. If the options are far apart, a rough estimate is enough and saves minutes.
  • Keep sign conventions fixed. In optics and electrostatics, choose one convention and never switch mid-question.

7. Common ways to lose marks in a physics test

  • Mixing units, for example centimetres with metres, or grams with kilograms.
  • Reading "which is not correct" as "which is correct".
  • Answering a numerical question in the wrong form; read the instructions on whether a whole number or decimals are expected.
  • Spending ten minutes on one question while easy marks wait later in the paper.
  • Changing a right answer at the end without a clear reason.
  • Leaving the paper's last section until there is no time to read it.

8. The last thirty days

The final month is for sharpening, not for new chapters. Sit full mocks at the time of day of your exam slot, go through your mistake notebook rather than whole chapters, and revise from your own short notes and formula sheet. Keep sleep regular in the last week; the final days are better spent on calm revision of what you know than on anything new.

On the day before the exam, do not sit a full mock. Look through your formula sheet and the slips you listed after earlier mocks, check your admit card and the route to the centre, and stop early.

9. Preparing for JEE and NEET in the same year

The physics syllabus of JEE Main and NEET overlaps almost completely, so one round of chapter practice serves both. What differs is the paper. NEET gives about a minute a question and favours direct use of standard results; JEE Main gives more than two minutes and expects longer working, including numerical answers with no options to check against.

If you are preparing for both, practise each chapter at JEE depth, then take some timed sets at NEET speed so the faster pace is familiar. In the final months, sit full mocks in the pattern of whichever exam comes first, and switch to the other's pattern as soon as it is over. Practising the switch matters: the habit of checking options carefully, which helps in NEET, can cost time in a JEE numerical.

10. If you are preparing for a second year

A repeat year starts with an advantage: you already know the syllabus and the exam. The risk is spending the year re-reading what you know. Begin with one full mock in the pattern of your exam, without preparation, and analyse it in the four groups described above. That paper tells you which chapters to rebuild and which only need practice.

Keep a steady weekly rhythm of chapter sets and full mocks from the first month rather than saving mocks for the end, and keep your mistake notebook from the very first test. By the final months it becomes your revision list, built from your own errors rather than from a book.

Put it to work

Check the sums for your exam

Marks calculator

Type how many you got right and wrong; the rest count as left. Uses each exam's own marking.

Your score148
Out of300
Left23

Score = right × marks for a right answer − wrong × marks for a wrong one. For JEE Main and NEET that is 4 × right − wrong; for BITSAT, 3 × right − wrong.

JEE Advanced is left out: its marking changes from year to year and is printed in each paper's own instructions.

Try a question

One physics question in the JEE Main style. Pick an answer and check it.

A ball is thrown straight up at 20 m/s. Taking g = 10 m/s², what is the greatest height it reaches?

Options

See the solution

Answer: (B) 20 m. At the top the ball stops for an instant, so v = 0. From v² = u² − 2gh: 0 = 20² − 2 × 10 × h, so h = 400 ÷ 20 = 20 m. A quick check: the height should grow with the square of the speed, and only h = u²/2g does.

Start with one chapter

Practise the chapter you finished this week, then come back to it in seven days.

Start free